Automatic Corrugated Cardboard Production Line Corrugated Box Making Machine Fast Delivery

 

3 layers 1600mm Corrugated Cardboard Paper Box Production Line Packaging Making Machine

 

  Corrugated cardboard production line is the key production equipment for corrugated carton production enterprises. In the face of more and more fierce market competition, corrugated carton enterprises have to meet the requirements of multiple orders, small quantities and fast delivery of corrugated cardboard users. It is necessary to improve the production line of corrugated cardboard production line by improving the automation of corrugated cardboard production line. The level of production management can achieve the goal of improving quality, improving efficiency, saving energy, saving manpower, reducing material consumption and reducing waste products. The cadre equipment is the key to achieve this goal. The corrugated carton enterprises should upgrade the cadres and equipment of the old production line in an all-round way, and the new production line should be equipped with production management system. Automatic cadre equipment.

 

Main Technical Parameters and Requirements

 

Design Speed:100m/min

Economic Speed: 80m/min for 3 Ply sheet 

Working Width:900mm-1600mm

 

SM-WZ Hydraulic Mill Roll Stand

 

Technical Parameters

 

1.Operating style of paper stand: fully hydraulic type

2.Available paper dia.: Φ400mm - Φ1600mm

3.Max. single-loading weight: 3000kg

4.Main shaft: Ø 215mm

 

Hydraulic System Parameters

 

1.Work pressure: 12-16 MPa

2.Work range of hydraulic cylinder(swinging): Φ100mm×460mm

3.Dia. of hydraulic cylinder(clamping): Φ63mm×720mm

 

Structural Features

 

1.The symmetric structure can be installed with two bundles of base paper at the same time used to change papers without halting.

2.The hydraulic driver is adopted to finish base paper lifting, clamping, loosening and centering.

3.The clip head is in expansion design.

4.The pneumatic brake is adopted for tension control, which can be on-line control with Paper Splicer.

 

Main bought-in components and raw materials

 

1.Main shaft: high quality seamless pipe from Tianjin

2.Side wallboards: welded by Q235A plate from Hebei Handan

3.Arms: casting HT200 from Hebei

4.Main channel: 300mm from Tangshan

 

Rail and Trolley

 

Structural Features

 

1.The base paper is fed in for use, conveniently and flexibly

2.The whole rail is under ground with its main structure welded by 16# channel from Tianjin or Jinan, firm and durable.

3.Two trolleys are matched for paper feeding from two sides

 

SMYR Single &Triple roll Pre-heater

 

Structural Features

 

1.Each roller surface is treated with exactly grinding and chrome plating, glorious and durable

2.Electrically wrap angles adjusting ensures paper pre-heating area within 60-270°

3.The pre-heating roller is professionally produced, conforming to the national safety standard of pressure vessel, should be with certificates.

4.The pre-heating roller and paper leading roller are treated with electric plating

5.Wrap angles are electrically adjusted for various papers and speeds

 

Raw materials and bought-in components

 

1.Side wallboards: casting HT200 from Hebei

2.Paper leading roller: 20#steel from Tianjin or Baotou

3.Pre-heating roller: 20G steel from Tianjin or Baotou.

 

Parameters of Main Parts:SMDM 120 Single

 

1.Main corrugated roller:Ø292mm

2.Pressure roller:Ø292mm 45# seamless steel pipe, quenched

3.Glue Roller: Φ216mm 45# seamless steel pipe, surface treated with special mesh nicking and chrome-plating

4.Glue Scraping Roller: Φ130mm 20# seamless steel pipe

5.Pre-heating Roller: Φ320mm 20G

6.Glue tray thickness 2mm stainless steel 

Structural Features:

 

1.This machine adopts independent motor transmission and variable-frequency control.

2.It adopts wind adsorption for paper guiding to keep flute stability at high speed

3.The corrugated paper is adsorbed to the middle corrugated roller to form a negative pressure zone of 180°and then to finish the rolling of corrugation through the vacuum box by fan.

4.The width of suction slot of lower corrugated roller is not more than 2mm, able to reduce the stripe mark on single side corrugated cardboard.

5.The transmission part adopts universal joint transmission and separates the vibration source, which makes the maintainability higher, the transmission more stable and the operation more reliable.

6.The reducer casing adopts oil bath lubrication and closed gear transmission, reducing the vibration of machine.

7.This machine adopts auto-cycle glue supply and pneumatic control glue supply and return, making it be characterized by buffering effect.

8.The glue roller surface is treated with special mesh nicking and chrome-plating

9.Upper and lower corrugated rollers are made of 52CrMo high quality alloy steel.

10.Corrugated roll made of Haili

11.Flute profile: (B flute- teeth and C flute- teeth)

 

Raw materials and Bought-in Components

 

1.Side Wallboards and base: HT200 Place of origin: Hebei

2.Base and transmission parts : HT200 Original :Hebei

 

TO-B Dual-layer Overbridge

 

Technical Parameters

 

1.Dia. of paper pulling roller: up-front: Φ135mm, up-back: Φ135mm

2.Dia. of low-speed feeding roller: driving roller: Φ135mm, driven roller: Φ135mm

3.Tension roller: Φ85mm, lifting roller: Φ85mm

4.Leading roller: Φ85mm

 

Structural Features

 

1.Single- corrugated sheet from single facer shall be exactly transmitted to the tension brake or suction brake for use by overbridge transmission system.

2.It is matched with suction straining system, 3KW high-voltage centrifugal variable-frequency blower for sheet vacuum adsorbing and straining and electrical deviation corrector to ensure good sheet gluing.

3.Two operational panels are installed and controlled by electrics, which can be adjusted on or off the bridge.

4.The separate variable-frequency driver is adopted for collecting part to be online with single facer and the single-corrugated sheet from single facer shall be sent transmitted onto the overbridge to be kept in certain stock for speed compensation and next into the three-roll pre-heater for pre-heating and then into the pasting machine and double facer for gluing and forming.

5.Two sets of belt tilting device are matched for paper transmitting stand. The sheet shall be in wave overlapping under lower stacking speed for sheet stock..

 

Raw materials and Bought-in Components

 

1.Main bridge stand:20# channel from Tangshan

2.Conveyer belt of paper pulling part: industrial cotton belt from Shenyang

3.Conveyer belt of paper storage part: parallel transmitting rubber belt from Tianjin

 

Corrugated flute roller type parameter list

 

Flute type Flute height Flute in 300mm Paper shrinkage rate
A 4.6±0.2 34±2 1.43~1.52
C 3.6±0.2 40±2 1..37~1.46
B 2.6±0.2 48±2 1.33~1.39
E1 1.5±0.15 74±2 1.25~1.32
E2 1.3±0.1 82±2 1.21~1.28
F 0.7±0.1 126±2 1.15~1.23
G 0.5±0.1 152±2 1.10~1.21

 

Automatic Corrugated Cardboard Production Line Corrugated Box Making Machine Fast Delivery

Products

Corrugated Cardboard Production Line

Company Profile
Hebei Soome Packaging Machinery Co.,LTD
Verified Suppliers
Trust Seal Verified Suplier
Home
All Products
About Us
Contact Us
Request A Quote
Change Language